登錄
注冊
產(chǎn)品詳情：
Ultra•Strip® II Narrow Sheet Label
Label Product Information Sheet – 02/06
The Ultra•Strip II Sheet Label provides adequate detection and high deactivation performance. The sheet format is intended for hand application.
Product Codes
ZLLFNSLE1......................................................White
ZLLFNSLE2..................................................Barcode
ZLLFNSLE5.......................................................Black
Label Dimensions
label length............45.21mm ± 0.5mm (1.78” ± 0.020”)
label width............10.67mm ± 0.5mm (0.420” ±0.020”)
label thickness
(excluding liner).................Maximum 1.89mm (0.074”)
label thickness
(including liner)....................Maximum 2.00mm (.079”)
Environmental Constraints
temperature...Maximum storage temperature not
to exceed 50°C (122° F) for 96
hours at 80% RH
humidity.........Unaffected by 80% humidity at 50°C
(122°F), up to 96 hours
shelf life..........Two years from date of manufacture when labels are stored between 15°C -32°C (60°F - 90°F), 30 - 80% RH.
Sheet Specifications
labels per sheet..........................................................108
sheet format..............................................5000-unit case
case weight...........................................2.76kg (6.07 lbs.)
ext. carton
dimensions..................27.9 x 20 x 11 cm (11 x 8 x 4.5”)
ext. cubic feet
per case.....................................................................0.23
cases per pallet..........................................................255
Materials of Construction
Plastic housing
Resonator
Laminate
Bias
Laminate
Adhesive
Release Liner
plastic housing....Polystyrene/polyethylene 0.3mm (0.012”) thickness
magnetic acoustic
resonator.............Proprietary resonant magnetic material. Amorphous alloy based on iron, and containing nickel, cobalt, boron and silicon.
laminate...............Low Density Polyethylene / Polyester / Polyethylene 0.127mm (0.0050")
bias......................Proprietary semi-hard magnetic material containing iron, nickel, and chromium.
laminate...............Low Density Polyethylene/Polyester 0.114mm (0.0045")
adhesive...............Double-coated rubber-based adhesive
2.4 mil thick per side
Minimum peel strength of 80 oz./in.
release liner.........Double-sided, silicon-coated
80 lb. Bleached Kraft liner 0.114mm (0.0045”) thick
Usage Instructions
• Place within 7.6 cm (3 “) of bar code.
• Place in least conspicuous location.
• Do not cover warnings, expiration dates or important consumer information.
• Label placement should be in accordance with Source Tagging Guidelines.
• It is recommended that the surface to which the label is applied be clear and free of all dirt, grease, oil, etc.
• Ambient magnetic field of labeled product greater than 100mG may result in reduced label performance.
• Label not to exceed temporary magnetic field exposure greater than 8 Gauss.
• Individual analysis recommend for placement on metal products.